Ekinex EK-GO1-DL, 4 x channel DALI dimmer

Produktnummer: 10362011

Lagerbeholdning:

inkl. mva.

Ta kontakt for pris

The 4-channel DALI dimmer EK-GO1-DL allows lighting control of dimmable LED and halogen light sources thanks to a KNX (TP) button connected via DALI/KNX Gateway

Beskrivelse

The 4-channel DALI dimmer EK-GO1-DL allows lighting control of dimmable LED and halogen light sources thanks to a KNX (TP) button connected via DALI/KNX Gateway or by another device, directly connected to the dedicated input selectable among normally open button, 0 to 10V analog input, 1 to 10V analog input or 10 kΩ potentiometer. The 4 phase-cut outputs (trailing edge) at 230 V are suitable for R-C loads.

The device has a built-in DALI communication bus, it is powered by 230 Vac mains voltage and it does not require an auxiliary power supply.

FUNCTIONS / FEATURES

FUNCTIONS

Memory function
Brightness control
Adjustable minimum brightness
Soft switching
Optimized dimming curve

FEATURES

Plastic case
Device for eight modular units (1 MU = 18 mm)
Mounting on DIN 35 mm profile rail (EN 60715)
Degree of protection IP10 (once the device has been installed)

CONNECTIONS

Screw terminals for DALI bus, command, power supply and LED source
Maximum length of the connection between dimmer-driver and command < 10 m

CONFIGURATION AND COMMISSIONING

6 pins dip switch to set the input source (local controls)
8 pins dip switch to set the minimum dimming (range:0-20%), independently for the 4 output channels