Ekinex KNX-bus produkter

Ekinex® 640 mA KNX-buss-strømforsyning EK-AG1-TP forsyner og overvåker 30 Vdc-spenningen som kreves av KNX-bussen for å fungere.

Ekinex® EK-AM1-TP-strømforsyningen produserer og overvåker 30 Vdc-spenningen som kreves for drift av KNX-bussystemet.

The ekinex® line / area coupler EK-BA1-TP can be used as a line coupler to connect a secondary line to a main line, as an area coupler to connect a main line to a backbone line or as a repeater.

The ekinex® EK-BB1-TP IP interface realizes the bidirectional data connection between a PC or a laptop and a KNX bus system through a LAN network.

The ekinex® EK-BC1-TP IP router realizes the bidirectional data connection between a PC or a laptop and a KNX bus system through a LAN network.

The ekinex® USB interface EK-BD1-TP allows a bidirectional data connection between a PC and a KNX bus system.

Ekinex® Gateways EK-BF1-TP-D1 used to control electronic control gear (ECG) with a DALI interface (according to EN 62386) via the KNX installation bus.

Ekinex® Gateways EK-BF1-TP-D2 used to control electronic control gear (ECG) with a DALI interface (according to EN 62386) via the KNX installation bus.

The Ekinex® DALI - KNX Gateway allows the control of the devices present in a DALI network from a KNX TP network.

* Utgående modell - Så lenge lager holder.

The ekinex® Modbus RS485 - KNX Gateway performs a protocol conversion between a serial RS485 Modbus RTU and a KNX TP network.

The ekinex® Modbus TCP/IP - KNX Gateway performs a protocol conversion between a Modbus RTU over TCP / IP and a KNX TP network.‎

The ekinex® BACnet - KNX Gateway performs a protocol conversion between a BACnet and a KNX TP network.‎