inkl. mva.
The ekinex® DMX - KNX Gateway performs a protocol converson between a serial RS485 DMX and a KNX TP network.
DESCRIPTION
Device working as a gateway (protocol conversion) between a DMX network and a KNX (TP) network. Mounting in distribution board on EN 60715 rail (4 modular units, each 18 mm). To be used in KNX installations for home and building automation.
FUNCTIONS / CHARACTERISTICS
DMX side • Electrically insulated RS485 serial communication port, 1-way DIP switch to activate the line terminator (120 Ohm) • DMX master communication • 250 kbaud communication speed • Device addressing from 0 to 512 • 1 byte register writing on a maximum of 512 DMX devices KNX side • KNX TP (twisted pair) 9600 baud communication port, electrically insulated from power supply • Volatile support memory with "image KNX" buffer of 1440 bytes
CONFIGURATION AND COMMISSIONING
A detailed description of the parameters can be found in the application manual of the device. Configuration and commissioning require the application software CGEKBK1TP.exe
Sesjonen din har nå utløpt. Vennligst klikk "OK" for å oppdatere siden og unngå tap av eventuelle ikke-lagrede data. Dersom du var logget inn, må du nå logge inn på nytt.
