Til toppen

Ekinex EK-IF1-SEC-TP, IP secure router

Produktnummer: 10363972
Lagerbeholdning:

inkl. mva.

The Ekinex® EK-IF1-SEC-TP IP router realises a bi-directional data connection between a PC or laptop and a KNX bus system via a LAN.

The Ekinex® EK-IF1-SEC-TP IP router realises a bi-directional data connection between a PC or laptop and a KNX bus system via a LAN. The IP interface supports the tunnelling protocol and allows addressing, parameter setting, visualisation, protocolling and diagnosis of KNX bus devices via ETS. A line/area coupler function is also integrated in the IP router; telegrams can be exchanged between KNX TP bus lines via the device via a backbone over TCP/IP. The device has an integrated KNX bus communication module and is designed for 35 mm profile rail mounting. The power supply is supplied via the KNX bus.

Technical data
  • Power supplied via KNX bus (21-30 Vdc)
  • Current consumption 20 mA from KNX bus
  • Up to 8 KNXnet/IP connections simultaneously
  • Extended filter table for main groups 0..31
  • Operating temperature: - 5 ... + 45°C
  • Relative humidity: 5-93% noncondensing

 

Functions / Features

  • Plastic housing
  • Programming button and LED on the front
  • LEDs for status and data traffic signalling on bus line and Ethernet network
  • Buttons for activating special functions
  • Connection to bus line via KNX terminal
  • Connection to Ethernet network via RJ45 connector
  • Mounting on 35 mm profile rail (in accordance with EN 60715)
  • Device from 1 modular unit (1 UM = 18 mm)
  • IP20 degree of protection (device installed)
  • Support of KNX secure technology, can be activated via ETS®
  • KNX line/area coupler functionality

 

Configurationa and commissioning

A detailed description of the parameters can be found in the application manual of the device. Configuration and commissioning require ETS5 or later versions. ETS application program: APEKIF1TP##.knxprod (## = release).

Tilbehørsprodukter
Nyhet

Ekinex EK-AM1-TP, Bus power supply 1280 mA

The Ekinex® EK-AM1-TP power supply produces and monitors the 30 Vdc voltage required for operation of the KNX bus system.
10363805
Legg i handlevogn
Legg til favoritter