inkl. mva.
KD-X444LP is a 4K/UHD 18Gbps, HDCP2.2 compliant HDMI over CAT6 Transmitter Plus Receiver. The HDMI extender set extends HDMI signals with the latest standards in resolution, HDR, and Chroma over a single CAT6 cable.
Single CAT5e/6 UTP/STP Extension: Fully automatic equalization, and amplification depending on cabling length
4K Resolution Support: 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)
Flexible Power over Cat (PoC): Only one power supply needed. Connect at Tx or Rx unit.
Visually Lossless Compression: 18G enabling technology applied to all video formats exceeding 10.2Gbps to accommodate transmission channel
Low Profile: Super slim chassis design
Signal Extension: For resolution and cable quality
4K/UHD (18G) with CAT5e/6: Up to 230ft / 70m
4K/UHD (18G) with CAT6A STP: Up to 328ft / 100m
1080p with CAT5e/6: Up to 230 ft / 70m
1080p with CAT6A: Up to 328ft / 100m
10G Pass-thru: Mode enables uncompressed 10.2Gbps signal extension.
HDR10 (High Dynamic Range): More life-like images through a greater range of luminance levels
HDCP 2.2: Compliancy up to HDCP 2.x and backward compliant
Deep Color Support: Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:4:4/8 bit
IR Sensor: Sensor powering via +5V on IR In ports collects line-of-sight IR from remote(s) without external IR connecting block
Up/Down IR: Two channels of IR enable control to/from devices or control systems connected to Tx and Rx units
RS-232: Bi-Directional control to/from Tx and Rx unit on Phoenix connector
Full Buffer Technology: Key Digital’s proprietary suite of EDID, HDCP, TMDS, and HPD management to overcome Pro AV installation obstacles
EDID Management: Internal library with 14 internal EDID handshakes including 4K with HDR in addition to native EDID data copied from CAT5e/6 or HDMI pass-thru outputs
HDCP Authentication: HDCP sources are authenticated by HDCP key on transmit unit, for one-to-one topology
Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected display/output device
TMDS Re-Clocking: Re-generation of TMDS (AV signal) channel data at Transmit unit for brand new AV signal
Surround Audio Support: on HDMI pass-thru and UHDoTP outputs:
HDMI Pass-Thru: Supports Dolby®, Dolby® TrueHD, DTS™ and DTS-HD™ (formats up to 7.1)
CAT5e/6 Output: Supports Dolby®, DTS™ (formats up to 5.1/6.1)
Sesjonen din har nå utløpt. Vennligst klikk "OK" for å oppdatere siden og unngå tap av eventuelle ikke-lagrede data. Dersom du var logget inn, må du nå logge inn på nytt.
